Services

RF Emissions Studies (practical and theoretical)

The FCC and OSHA have set limits on human exposure to RF energy to ensure the safety of anyone walking or working near wireless antennas. As a result, antenna owners or licensees must run a compliance study for new or modified RF environments to verify that the site’s RF emissions meet the requirements on exposure limits. SiteSafe provides independent, professional, third-party compliance studies that meet the FCC’s mandate and provide our customers with an increased level of liability protection. These studies can be performed on any type of wireless facility, and we have certified more than 100,000 rooftops, towers, and water tanks for RF compliance. SiteSafe’s RF exposure compliance services include:

• Electromagnet Emissions (EME) Site Studies
• EME Site Modeling
• Non-Ionizing Radiation (NIR) Modeling
• Site Safety Plans
• Site Remediation

AM Detuning

Any antenna structure built in close proximity to an AM broadcast station has the possibility of distorting the station’s antenna pattern, which would violate FCC regulations. While wireless signals do not interfere with an AM station’s signals, the antenna structure itself, depending on its height and proximity, can intercept a substantial amount of energy from a nearby station, re-radiate it, and scatter it in other directions. By doing so, the structure produces unapproved changes in the shape of the station’s FCC-licensed coverage area. Wireless licensees must therefore protect the AM station’s pattern and either prove that there is no distortion by the construction or modification of a structure, or minimize its impact by “detuning” the site.

Interference and Intermodulation Studies

The FCC mandates that antenna owners or licensees must ensure that the RF signal from their sites does not interfere with any existing signals from other carriers, Public Safety, etc. Interference and intermodulation studies are necessary to determine the potential of any new or modified signals interfering with existing signals, so owners can plan and design their sites accordingly. SiteSafe performs detailed interference and intermodulation studies for proposed antenna sites to determine the potential for interfering with co-located third parties, or to help maximize the use of structure space. SiteSafe’s comprehensive services for interference studies include:

• Detailed Interference Analysis Reports
• Intermodulation Analysis Reports

FAA Obstruction and Airspace Analysis

When a new tower or transmission power line is being planned, owners need to take into account and comply with any FAA regulations that may impact the proposed location and ensure that all necessary state and federal forms are filed. SiteSafe provides a comprehensive suite of expert services to address all your needs when it comes to airspace regulation compliance, including:

• Form Filings and Tracking – 7460-1, 7460-2 Part 1, 7460-2 Part 2, State
• FAA Compliance Studies
• Search Area Ring (SAR) Analysis
• Site Specific Evaluation
• Follow Up Search Area Ring (SAR) Analysis
• AM Screening
• Expert Witness Testimony
• Consulting Services

RF Safety and Awareness Training

Both OSHA and the FCC require that individuals with exposure to RF signals in their work environments be aware of the safety issues and how to properly mitigate them. Our RF Safety Notes can give you more detail about what is required and why. In addition to our services that help companies comply with federal RF regulations, SiteSafe offers Peoplesafe® 6.0, our comprehensive RF Safety and Awareness Training program designed specifically for companies whose employees and contractors work on or near transmitting antennas. The Peoplesafe® course covers all aspects of RF safety and certifies that students have obtained a clear understanding of proper practices when working in and around RF environments. Topics covered are:

• RF Radiation Safety
• Biological Effects on the Human Body
• FCC/OSHA Standards and Regulations
• Site Safety – Working on Antennas and Coaxial Cables
• Antennas
• Determining FCC Compliance
• RF Personal Monitors

Spectrum Management

At SiteSafe, we consider ourselves to be innovators in our field, never resting on what’s already been done. We strive to go further, to offer more. It’s this commitment to excellence that led to our offering of our online platform SpectrumWatch™ . Founded in 1984, SpectrumWatch™ is the premiere online system for the research and application of land mobile wireless licenses. With its multi-faceted tools and daily refreshes of its databases, SpectrumWatch™ allows Frequency Coordinators, licensees, and other interested parties to search and evaluate land mobile wireless licenses with confidence.

Telecom Services and Consultant (RF Audit)

In RF Audit we check the following major events through RF Drive Test and then analyze the Log files with proper solution.

• Coverage of service area: Urban, suburban, rural and inside building
• Intra and intercell handover
• Call success rate
• Rx Qual.
• Rx Lev.
• Checking antenna orientation according to the design or not
• Checking end to end connection of feeder cable
• Verifying that the RF implementation matches the RF design sheet
• Readjusting down tilts if incorrect
• Analysis of Block calls
• Analysis of Dropped calls
• Analysis of Handover failure

Drive Testing (Wireless Voice, Video, Data Quality Testing Goes Mobile)

Tel-e-Com has the right experience and expertise to provide variety of remote support services like planning, design, configuration, commissioning, operation, Maintenance, performance monitoring and Optimization of the GSM, CDMA, EVDO, WCDMA and LTE Telecom Networks.

TSC experienced consultants & engineers with wide range of industry experience offer Real Business value and innovation by providing RF Services.

Phase 1 & Phase 2 Compliance

A similar argument can be made when deciding whether to implement P25 Phase 1 or Phase 2. The main difference between the two phases is system capacity, so the primary reason for opting for Phase 2 is additional capacity.

Phase 2 TDMA (Time Division Multiple Access) doubles the number of talk paths compared with Phase 1. P25 Phase 2 TDMA creates two logical channels in one 12.5kHz physical channel. Because the Phase 2 control channel is unchanged from Phase 1 there is compatibility between the phases.

CW Data Collection

CW testing is Continuous Wave Testing.
CW testing is the First Phase of Telecom/Mobile Network/Radio Frequency (RF) Planning.
Network Planning/ RF Planning is always start with Continuous Wave Testing Method for all GREENFIELD project.
The main aim of doing CW testing is to gather information to design a propagation model of transmitted signal for mobile communication.
It is carried out to gather actual propagation of mobile signals in different terrain and clutter.
Basic of doing this test is to measure or to know the actual distance, a transmitted signal would travel from a Mobile Base Station that we simply say MOBILE TOWER or SITE.
Propagation Model primarily depends on geography and terrain of a circle.
Secondly it also depends on clutter type e.g. Dense Urban (High rise congested buildings), Urban or Rural area.
This is the traditional method and best method for Model Tuning/Model designing.
This is applicable for all technologies that may be 2G, 3G, LTE or 5G. It is mainly Spectrum dependent test.
With the help of CW testing and Model tuning we can design a model for our network to generate coverage prediction and network planning.
Quality of any network depends on the accuracy of the Propagation Model designed based on CW testing and Model Tuning.

Model Tuning

In simple language Model Tuning is done to match the coverage distance of transmitted signal, in field and in Planning Tool for the same frequency and for similar kind of terrain and clutter.

RF Design & Planning (Atoll, Aircom & PlanetEV)

Mentum Planet 5 - the fifth generation of this software platform - was built to address the complex requirements of LTE and WiMAX operators, as well as their consultants and equipment vendors. The product is a sophisticated (yet easy-to use) Windows-based software solution that helps wireless operators and others operating wireless networks to plan and optimize their performance. Along with Mentum Planet 4.5, the Mentum Planet product family addresses the vast majority of all commercially deployed wireless technologies including GSM, GPRS, EDGE, WCDMA, HSPA, CDMA, CDMA2000, EVDO, WiMAX and LTE.

RF & IT Program Management

Tiran Project Management Services (PMS) as a specialized service that provides its clients end-to-end project management services encompassing the entire life cycle of telecom infrastructure implementation – starting from site survey to site integration. Aster’s Project Management helps complete compliance and ensures that all issues are strictly managed and controlled to the required specifications. In addition Aster’s Project Management Services also includes supply of skilled manpower for Project Management activities on time and expenses basis. Aster PMS teams are extremely focused on complying with the safety and environment aspects of the project.

Application Software Development

Enterprise mobility is the next leap towards which the entire IT sector is marching. Information Technology is not under development stage, which is a common Fact every enterprise owner should admit to. Colan Infotech Private Limited helps every business owner to achieve their goal in Enterprise Mobility by the way they normally work. We are an asset to many IT firms among companies for best mobile application development companies, for optimizing their work across mobile devices. We are the mobile application development company gives custom portable application advancement benefits crosswise over different mobile devices. Experts here can create any unpredictable applications and create as the client needs. Best android or ios mobile app development services company must have worked with some popular brands. You can check out the experience and reputations of Colan Infotech in our Client Testimonials page.

Website Development

Website Development is basically related to generating and maintaining websites. It includes in many terms such as Web Designing, Coding, Programming and Database Management or many more Languages are used. In general Website Development is a type of task which affiliated to the Developing Websites for web-hosting through internet and intranet. Web Development is work on the static and Dynamic Pages both for Designing Proper Websites,Web Development is very useful services for business to increases knowledge of your Company and product via the internet because of these people more aware of your product and services

Database Management System

Database Management System or DBMS in short refers to the technology of storing and retrieving usersí data with utmost efficiency along with appropriate security measures. This tutorial explains the basics of DBMS such as its architecture, data models, data schemas, data independence, E-R model, relation model, relational database design, and storage and file structure and much more.

Search Engine Optimization (SEO)

Our Advanced Search Engine Optimization (SEO) training course will transform you into a full-stack SEO professional driving sustained growth in your website’s most critical marketing channel. You will master the many facets of SEO including keyword research, technical SEO, link building, analytics, and much more.

Microwave LOS Study

Microwave frequencies range from 300 MHz to 30 GHz, corresponding to wavelengths of 1 meter to 1 cm. These frequencies are useful for terrestrial and satellite communication systems, both fixed and mobile. In the case of point-to-point radio links, antennas are placed on a tower or other tall structure at sufficient height to provide a direct, unobstructed line-of-sight (LOS) path between the transmitter and receiver sites. In the case of mobile radio systems, a single tower provides point-to-multipoint coverage, which may include both LOS and non-LOS paths. LOS microwave is used for both short- and long-haul telecommunications to complement wired media such as optical transmission systems. Applications include local loop, cellular back haul, remote and rugged areas, utility companies, and private carriers. Early applications of LOS microwave were based on analog modulation techniques, but today’s microwave systems used digital modulation for increased capacity and performance.